Proven technology, engineered into one ThermoSys system.

ThermoSys works with three international technology partners: Rittal for enclosures and panel infrastructure, Ecostar for industrial and process burners, and Ecodense for commercial condensing boilers. We select, engineer, integrate, commission and support each one as part of a complete thermal system, with one team accountable from the first drawing to the final sign-off.

How the partners fit together

Most thermal plant problems start at the joins: a burner set up without its controls in mind, a panel that overheats, a boiler cycling because nobody tuned the whole loop. A ThermoSys system is built in layers, with each partner chosen for the job it does best and ThermoSys responsible for how they work together.

  1. L-01

    Panel, power and climate

    Rittal

    Enclosures, busbar power distribution and cooling house the controls and keep them running in hot, dusty plant rooms.

  2. L-02

    Combustion

    Ecostar

    Burners matched to the fuel, firing range and combustion chamber of each boiler, furnace or dryer.

  3. L-03

    Heat generation

    Ecodense

    Condensing boilers and cascades that recover heat from the flue gas and follow the building's real demand.

  4. ThermoSys · One sign-off

    ThermoSys specifies the combination, engineers the interfaces, builds the panels, commissions the plant and stays on to support it. One team, accountable for the complete system.

PT-01GermanyEnclosures & panel infrastructure

Rittal enclosures, the backbone of every panel.

Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 and part of the Friedhelm Loh Group. ThermoSys builds its burner management, motor control and automation panels on Rittal systems, and services and maintains Rittal enclosures and cooling units once they are in use. Every panel starts from a tested, documented platform with global support behind it, and stays in good working order long after handover.

Rittal has run its own South African subsidiary since 2004, which gives local projects direct access to the Rittal range.

1961
Founded in Germany
2004
South African subsidiary
5
System areas
Rittal AX compact enclosure fitted with switchgear, terminals and control components

Rittal ranges ThermoSys specifies

R-01 / R-04
  • Rittal VX25 large enclosure system, bayed with doors open
    R-01

    VX25 enclosure system and Ri4Power

    A bayable large enclosure system with a continuous 25 mm pitch pattern on every axis, so mounting plates, rails and partitions fit wherever they are needed. Ri4Power adds low-voltage switchgear and power distribution on the same frame.

    • Bayable
    • 25 mm pitch
    • Ri4Power
  • Rittal AX compact wall-mounted enclosure with door open
    R-02

    AX and KX compact enclosures

    Wall-mounted compact enclosures and small terminal boxes for local control stations, junction boxes and field panels, available in sheet steel and stainless steel.

    • Wall-mount
    • Stainless option
    • Terminal boxes
  • Rittal Blue e+ S wall-mounted enclosure cooling units in three sizes
    R-03

    Blue e+ climate control

    Hybrid enclosure cooling that pairs a speed-regulated compressor with a passive heat pipe. Rittal quotes energy savings of up to 75% against conventional units, which counts in hot plant rooms that run all year.

    • Cooling units
    • Service and Repair
    • IoT interface
  • Rittal RiLineX busbar system with circuit breakers and components clipped on
    R-04

    RiLineX busbar power distribution

    A 60 mm busbar system with click-in, tool-free components and continuous touch protection, for compact and safer power distribution inside the panel.

    • 60 mm busbar
    • Tool-free
    • Touch-safe

How ThermoSys uses Rittal

Every ThermoSys panel is designed, built and tested in-house on a Rittal platform, then documented for the people who will maintain it. Once panels are in use, ThermoSys services and maintains the Rittal equipment and cooling units inside them.

  • Burner management and combustion control panels built on Rittal enclosures
  • Motor control centres and distribution boards on VX25 with Ri4Power
  • Panel cooling sized for South African plant room temperatures
  • Field stations and junction boxes in compact AX and KX enclosures
  • Service and maintenance of Rittal cooling units, including filter and coil cleaning, condensate drain checks and fault finding

PT-02TürkiyeIndustrial & process burners

Ecostar industrial and process burners.

Ecostar has manufactured burners in Istanbul since 1967, with its own R&D centre, a factory in Çorlu and exports to more than 50 countries. The range runs from monoblock burners for boilers to duoblock industrial burners and high-temperature process burners, with low-NOx and low-CO versions.

ThermoSys matches each Ecostar burner to the fuel, firing range and heat demand of the application, then integrates it with the right controls so it performs as part of the whole plant.

1967
Founded in Istanbul
50+
Export countries
30
R&D specialists
Ecostar burner head with flame tube and gas connection

Ecostar burner ranges

E-01 / E-04
  • Ecostar monoblock gas and oil burner
    E-01

    Monoblock burners

    Self-contained burners with the fan built in, for hot water and steam boilers and hot air generators. Available for natural gas, LPG, light oil and dual fuel.

    • Gas
    • Light oil
    • Dual fuel
  • Ecostar duoblock industrial burner with separate combustion air fan
    E-02

    Duoblock industrial burners

    Burners with a separate combustion air fan for larger boilers and heavier industrial duties, including heavy oil and combined-fuel operation.

    • Separate fan
    • Heavy oil
    • Large boilers
  • Ecostar FPB 20 process burner for industrial furnaces
    E-03

    FPB and Gazoram process burners

    FPB burners for industrial furnaces, melting and high-temperature baking, and Gazoram burners for continuous heating in production processes.

    • Furnaces
    • Melting
    • High temperature
  • Ecostar hot air generator for industrial drying
    E-04

    Hot air generators

    Direct-fired hot air for drying and process heating across a wide temperature range, on natural gas, light oil, heavy oil or dual fuel.

    • Drying
    • Process air

How ThermoSys uses Ecostar

The right burner is a combination of fuel, chamber, turndown and control. ThermoSys selects all four together.

  • Burner selection matched to fuel, firing range and combustion chamber
  • Burner replacements and fuel conversions on existing plant
  • Integration with ThermoSys burner management panels
  • Commissioning, emissions set-up and ongoing service

PT-03TürkiyeCommercial condensing boilers

Ecodense condensing boilers and cascades.

Ecodense is Ecostar's condensing boiler brand, launched in 2016. Its premix boilers use stainless steel heat exchangers and a 5:1 modulation ratio, so output follows the building's real demand instead of cycling on and off.

ThermoSys engineers Ecodense boilers into complete commercial plant rooms, from a single wall-hung unit to a cascade of 16 boilers, with the pumps, controls and safety equipment designed around them.

2016
Range launched
5:1
Modulation ratio
16
Boilers per cascade
Ecodense roof-top condensing boiler unit with twin flues

Ecodense boiler ranges

D-01 / D-04
  • Ecodense WT-S ONE wall-hung condensing boiler
    D-01

    WT-S ONE wall-type boilers

    Wall-hung condensing boilers from 35 to 65 kW for heating and domestic hot water, on natural gas or LPG.

    • 35–65 kW
    • Gas / LPG
  • Ecodense WT-SS wall-type condensing boiler
    D-02

    WT-SS wall-type boilers

    Twelve outputs from 45 to 150 kW, with a heavier-gauge stainless steel heat exchanger and built-in magnetic residue protection. Up to 16 units cascade to 2,400 kW.

    • 45–150 kW
    • Cascade to 2,400 kW
  • Ecodense Cell Condense modular floor-type condensing boiler
    D-03

    Cell Condense modular boilers

    Modular floor-type condensing plant from 300 to 1,810 kW. If one module needs attention, the others keep running, so the building stays warm.

    • 300–1,810 kW
    • Modular
    • Redundant
  • Ecodense floor-standing premix condensing boiler
    D-04

    Floor-standing condensing boilers

    Premix floor-standing boilers for medium and high outputs, from 60 to 550 kW, with cascade connection for larger loads.

    • 60–550 kW
    • Cascade

How ThermoSys uses Ecodense

A condensing boiler only condenses when the system around it lets it. ThermoSys designs the whole plant room with that in mind.

  • Boiler sizing and cascade design for commercial buildings
  • Plant room integration with pumps, controls and building management
  • Replacement of older non-condensing boilers
  • Commissioning, servicing and connected support

Partner questions, answered.

What engineers and plant managers most often ask about the technology behind a ThermoSys system. If your question is not here, ask the team directly.

Ask an engineer
  • Q-01Which technology partners does ThermoSys work with?

    ThermoSys works with three international partners: Rittal (Germany) for enclosures, power distribution and panel climate control; Ecostar (Türkiye) for industrial and process burners; and Ecodense, Ecostar's condensing boiler brand, for commercial heating.

  • Q-02What does ThermoSys do with partner equipment?

    ThermoSys selects the right equipment for each application, engineers the interfaces between burner, controls, panel and plant, builds the control panels, commissions the system on site and supports it afterwards. One team is accountable for how the complete system performs.

  • Q-03Are ThermoSys control panels built on Rittal enclosures?

    Yes. Rittal enclosure systems form the backbone of ThermoSys control panels, from compact AX and KX enclosures for field stations to bayed VX25 systems with Ri4Power for motor control centres and power distribution. Panel cooling, such as Rittal Blue e+, is sized for the plant room it will run in.

  • Q-04What is the difference between Ecostar and Ecodense?

    They come from the same manufacturer. Ecostar is the burner brand, founded in Istanbul in 1967, covering monoblock, duoblock and process burners and hot air generators. Ecodense is its condensing boiler brand, launched in 2016, covering premix wall-hung, floor-standing and modular boilers for commercial heating.

  • Q-05Which fuels can Ecostar burners fire?

    Ecostar burners are available for natural gas, LPG, light oil, heavy oil and combined or dual-fuel operation, with low-NOx and low-CO versions. The right model depends on the fuel available on site, the firing range and the boiler, furnace or dryer it serves.

  • Q-06What sizes of Ecodense condensing boilers are available?

    Ecodense wall-type boilers run from 35 to 150 kW per unit, and up to 16 WT-SS boilers can be cascaded to 2,400 kW. Floor-standing boilers cover 60 to 550 kW, and the modular Cell Condense range covers 300 to 1,810 kW.

  • Q-07Does ThermoSys support partner equipment after commissioning?

    Yes. ThermoSys provides ongoing technical support, servicing and connected support for the systems it delivers, including the Rittal, Ecostar and Ecodense equipment inside them.